Mouthguards for Freestyle Scootering, BMX and Skateboarding

A freestyle scooter mouthguard protects your front teeth when a trick ends face-first on the ground or against the handlebars. Boil-and-bite from €29.90, custom-fit from €79.90.

Our Scooter, BMX and Skate Mouthguards

Quick moulding to start out at the skatepark, custom-fit for riding often or in competition.

Contents
  1. Freestyle scooter mouthguard: when is it really useful?
  2. Boil-and-bite or custom-fit for riding?
  3. Riders’ problems, and our answers
  4. Freestyle scootering for children and teenagers
  5. Riding with braces
  6. Wearing it properly at every session

Freestyle scooter mouthguard: when is it really useful?

Let us be honest: for commuting on an electric scooter, a mouthguard is not the priority piece of equipment. The helmet comes before anything else. A mouthguard makes sense as soon as you are going for tricks: skatepark, street, bowl, ramp, competition.

In freestyle scootering, the typical fall is forwards. The deck goes, the hands let go, and the face meets the ground or the handlebars. The front teeth, especially the upper incisors, take the shock first. In BMX, the handlebar can come up into the mouth on the landing of a jump. In skateboarding, the board shooting out from under you throws your chin towards the concrete. In motocross, the jaw slams shut under the helmet on every hard landing.

A mouthguard does not make a fall safe. It spreads the shock across the whole arch and avoids direct tooth-on-tooth or tooth-on-metal contact. It is often the difference between a split lip and a broken incisor.

Boil-and-bite or custom-fit for riding?

Both are worn on the upper teeth and come in Standard 3.5 mm or Reinforced 5 mm (+€10). Standard is enough for scootering, skateboarding and BMX. Reinforced is justified for dirt jumping, motocross or if you have already broken a tooth.

CriterionBoil-and-biteCustom-fit
Pricefrom €29.90from €79.90
Lead timeshipped within 3–5 daysat your home 5–10 working days after your impression is approved
Mouldingat home in 90 seconds, re-mouldableat the laboratory, from your impression
Who it suitsgetting started, occasional sessions, growing childrensessions several times a week, competition

The boil-and-bite mouthguard (thermoformable, moulded at home in hot water) is moulded with 30 seconds in hot (not boiling) water, 30 seconds in your mouth, 30 seconds in cold water. The custom-fit mouthguard is made at the Meaux laboratory in two layers, from the impression you take at home with the kit. For a detailed comparison: custom-fit or boil-and-bite.

Riders’ problems, and our answers

“It takes my breath away in runs”

A run at the skatepark is short but intense. A thick mouthguard forces you to breathe through your nose. Ours keep a low profile, fitted as close to the teeth as possible, to let air through with your mouth slightly open.

“It falls out when I talk to my mates”

Between tricks, you chat, you film, you give each other tips. A badly moulded model drops as soon as you open your mouth. The custom-fit stays in on its own, without clenching. You speak clearly and you drink without taking it out.

“I lose it in my bag”

Keep it in its antimicrobial case, not in a pocket or in your helmet. A crushed mouthguard loses its shape and no longer protects as well.

“With a full-face helmet, what’s the point?”

In BMX racing or motocross, the full-face helmet protects the chin and jaw from the outside. It does not stop the upper teeth hitting the lower ones on landing. The mouthguard works on the inside, as a complement.

Freestyle scootering for children and teenagers

Freestyle scootering is often practised between ages 8 and 16, just when the permanent teeth have come through. A broken incisor at 12 means years of follow-up treatment. A mouthguard is therefore well worth having for young riders.

During growth, boil-and-bite is the logical choice: it costs less and can be re-moulded when the teeth change. Check at the start of every season that it comes out easily and does not squeeze any tooth. Custom-fit becomes relevant when the teenager rides several times a week and the teeth are stable.

A tip that works: let the child choose their colour or add their nickname with the configurator. A mouthguard they like is one they wear.

Riding with braces

Many young riders wear braces. A face-first fall with an appliance can injure the inside of the lips and cheeks. A suitable mouthguard covers the appliance and leaves room for teeth that are moving. Always ask your orthodontist’s advice, then read our page on mouthguards and braces.

Wearing it properly at every session

Put it in before you enter the park, not after the first fall. Rinse it in cold water after the session and let it dry in its case. After a blow to the teeth, pain or a tooth that moves, stop the session and see a dentist promptly. The details of moulding and care are in the instructions. Do you also play a contact sport? See our pages by sport.

Frequently Asked Questions

Do you need a mouthguard for freestyle scootering?

It is not compulsory, but it is useful as soon as you do tricks at the skatepark or in street. Falls often go forwards and the front teeth take the impact. For riding in town, the helmet remains the priority.

Which mouthguard should you choose for a child who rides a scooter?

A boil-and-bite from €29.90 is a good fit: it is moulded at home in 90 seconds and re-moulded when teeth change. Check regularly that it is not squeezing any tooth.

Is a mouthguard useful with a full-face helmet in BMX or motocross?

Yes, the two complement each other. The full-face helmet protects the chin from the outside, while the mouthguard stops your upper and lower teeth colliding when you land a jump.

Can you breathe and talk with a mouthguard at the skatepark?

Yes, if the model is well fitted and low profile. Our mouthguards have a low profile in 3.5 mm thickness: you breathe with your mouth slightly open and you talk without taking it out.

Which thickness for BMX or motocross?

The Standard 3.5 mm is enough for scooter, skateboarding and park BMX. The Reinforced 5 mm (+€10) is worth it for dirt jumping, motocross or after a tooth has already been broken.

How long until I receive a custom-fit mouthguard?

The impression kit arrives at your home, we check the impression, then the mouthguard is with you 5–10 days after approval. The custom-fit starts at €79.90.

English