Mouthguards for Braces: What to Wear with Brackets?
A mouthguard for braces must protect the teeth, brackets and cheeks without interfering with treatment. Here is what really works, according to a dental technician.
Contents
- Mouthguards for braces: why it matters even more
- Our position: no “special braces” model, a boil-and-bite that follows your treatment
- Boil-and-bite, custom-fit or silicone “special braces” model: the comparison
- How to mould a boil-and-bite mouthguard with braces
- When to re-mould your mouthguard during treatment
- Aligners and clear trays: what to do in sport?
- After treatment: retainer and custom-fit mouthguard
- Upper or lower, with braces on both arches?
- Mouthguards and braces by sport
- Children and teenagers with braces
- Care with braces
- Our advice in brief
You have braces and you're getting back into boxing, rugby or basketball. First question: can I wear a mouthguard over them? Yes, and it's strongly recommended. Second question: which one? A mouthguard for braces must cover the brackets without crushing them, stay in place without you clenching your jaw, and keep up with your teeth as they move during treatment. Proteksports is a dental laboratory in Meaux, founded by a dental technician who does boxing and MMA. Here is our honest opinion.
Mouthguards for braces: why it matters even more
With fixed braces, a blow to the face doesn't only damage teeth. Brackets are small metal or ceramic pieces bonded to the enamel. Under a punch, an elbow or contact with the ground, they press against the inside of the lips and cheeks. Frequent result: cuts, mouth ulcers, a split lip.
The impact can also knock a bracket off or bend the wire. It isn't always serious, but it means an emergency appointment with the orthodontist and sometimes a delay in treatment.
The mouthguard acts as a barrier between the brackets and the soft tissues, and spreads the energy of the impact. It reduces the risks, it doesn't remove them. And during orthodontic treatment, your orthodontist's advice always comes first, especially for a child or teenager.
Our position: no “special braces” model, a boil-and-bite that follows your treatment
Let's be clear: Proteksports doesn't sell a “special braces” model. What we see in the laboratory is that the boil-and-bite generally works well with braces, for two reasons.
- It moulds gently around the braces. Softened in hot water, the material follows the shape of the teeth and brackets without forcing against them, as long as you mould it without biting hard.
- It can be re-moulded when your teeth move. Orthodontic treatment moves teeth week after week. A rigid mouthguard eventually stops fitting. The boil-and-bite can be reshaped in 90 seconds: 30 s in hot water, 30 s in the mouth, 30 s in cold water.
The Classic Boil-and-Bite costs €29.90, is handmade in France with a mouldable base and an EVA sheet reinforcement, and ships within 3 to 5 days (lead time varies).
The custom-fit, on the other hand, is not recommended during active treatment. It is made from an impression of your teeth at one point in time. If they move by a few tenths of a millimetre, it becomes too tight or too loose. It's better to have it made after treatment, or with your orthodontist's agreement if they think your teeth won't move much more.
Boil-and-bite, custom-fit or silicone “special braces” model: the comparison
You can also find orthodontic silicone mouthguards in shops, and sometimes at the chemist's, often called “special braces”. Here is how the three solutions compare during treatment.
| Solution | Advantages | Limits | During treatment |
|---|---|---|---|
| Boil-and-bite (Proteksports from €29.90) | Moulds around the braces; can be re-moulded when teeth move; good retention for the price; 3.5 mm or 5 mm thickness | Moulding takes a little care (don't bite hard); needs re-moulding after some appointments; less precise fit than a custom-fit | The choice we generally recommend, with the orthodontist's agreement |
| Custom-fit (Proteksports from €79.90) | Most precise fit; stays in place without clenching; easier to breathe and talk; two layers, including an outer EVA cushioning layer | Made from a fixed impression: doesn't follow moving teeth; more expensive | Not recommended during active treatment; the best choice afterwards, with the retainer |
| Shop-bought silicone “special braces” | Nothing to mould; soft material that leaves room for the braces; ready to use straight away | Standard size, retention often weaker; can move when you talk or breathe hard; bulk in the mouth depending on the model | A possible stopgap, especially for occasional use |
To go further on the two families, read our comparison custom-fit or boil-and-bite.
How to mould a boil-and-bite mouthguard with braces
The principle is the same as without braces, detailed in our instructions. With braces, three things change: you don't bite hard, you check that the mouthguard comes out easily, and you ask the orthodontist for advice first.
Before you start
- Brush your teeth. With braces, food particles get stuck easily. They shouldn't end up moulded into the mouthguard.
- Ask about wax. Some orthodontists advise covering the brackets with a little orthodontic wax before moulding, so the material doesn't catch around the brackets and wire. Others prefer direct moulding. Follow your orthodontist's instructions.
- Prepare two bowls: one of hot but not boiling water, one of cold water, and a mirror.
Moulding in 90 seconds
- 30 seconds in hot water (not boiling). The material softens. Take it out and shake off the water.
- 30 seconds in the mouth. Place it on your upper teeth, well centred. Close your mouth gently, without biting hard: you would crush the material against the brackets and it would become too thin at that spot. Press with your tongue against the palate, press your lips and cheeks in with your fingers, and suck in the air and water so the material follows your teeth.
- Remove it gently. If it catches around a bracket, don't pull it out in one go: loosen it on one side first, then the other.
- 30 seconds in cold water to set the shape.
The test before your first training session
- It stays in place when you open your mouth, without you needing to clench.
- It doesn't hurt and doesn't press hard on a bracket or the wire.
- You can breathe and talk more or less normally.
- It comes out without forcing.
If not, start again: that's the whole point of a boil-and-bite. If discomfort or pain persists after a new moulding, stop wearing it and show it to your orthodontist.
When to re-mould your mouthguard during treatment
Your teeth move, that's the aim of the treatment. The mouthguard has to keep up. Re-mould it:
- after an adjustment appointment (wire change, activation, added elastics or brackets) if you feel it no longer fits as well;
- when it presses on a tooth or bracket when it didn't before;
- when it drops down as soon as you talk or open your mouth;
- every time you resume after a break of several weeks without sport.
Signs it needs replacing
- It no longer stays in place, even after several re-mouldings.
- The material is cracked, holed or very worn down from chewing.
- The edges have become sharp or irritate the gum.
- It keeps a doubtful smell or colour despite cleaning.
A €29.90 boil-and-bite can be replaced without regret. With our offer, the 2nd boil-and-bite is 50% off: handy for keeping a spare in your bag.
Aligners and clear trays: what to do in sport?
Clear aligners are not designed to withstand impacts. In contact sports, they are generally not worn under the mouthguard: you take them out for the session, put them in their case, wear the mouthguard, then put the aligners back in straight afterwards. Your orthodontist may give you different instructions, however, particularly to respect the daily wearing time: their instructions are what count.
As aligners change roughly every one to two weeks, the boil-and-bite is again the most logical option: moulded on bare teeth, it can be re-moulded if your teeth have moved.
After treatment: retainer and custom-fit mouthguard
Once the braces are removed, the teeth are held in place by a retainer: a wire bonded behind the teeth, a removable tray worn at night, or both. This is when the custom-fit becomes the best choice again.
- With a bonded retainer wire: the impression reproduces it and the inner layer of the mouthguard moulds around it.
- With a removable retainer tray: take it out for sport, unless the orthodontist says otherwise. It isn't designed to absorb an impact.
Our custom-fit mouthguard is made in the laboratory from your impression, taken at home with the kit we send you. The impression is checked before manufacture, then you receive it 5 to 10 days after approval. It stays in place without clenching, you breathe, you speak clearly, you drink without taking it out. It holds. You forget the rest. The Classic is €79.90, in 11 colours. If your dentist prefers to take the impression themselves, see our page on mouthguards and the dentist.
Upper or lower, with braces on both arches?
In the vast majority of cases, the mouthguard is worn on the upper arch, even if you have braces on both top and bottom. The upper teeth take the most impact, and this is the format required by the rules of most contact sports.
With braces on the bottom, your lower teeth come up against the mouthguard when you close your mouth. Mould it without biting hard to keep some room. In certain particular cases (a significant jaw misalignment, a specific appliance), the dentist or orthodontist may recommend another solution: follow their advice.
Mouthguards and braces by sport
Boxing, kickboxing, MMA
Blows come from the front and the sides: that's where braces cut the inside of the cheeks. For a boxing mouthguard with braces, the boil-and-bite in Standard 3.5 mm thickness is fine for training; Reinforced 5 mm (+€10) is worth considering for hard sparring, provided it closes properly over the brackets. See our pages on boxing mouthguards and MMA mouthguards.
Rugby, American football
Tackles, falls, scrum contact: impacts are heavy and repeated. The classic problem with braces: a mouthguard that drops down when you shout a call, and that you clench to keep in place. A well-moulded boil-and-bite sorts that out. See our rugby mouthguard page.
Basketball, handball, hockey
Here, the mouthguard is often forgotten. Yet an elbow on a rebound or a stick is enough to split a lip against the brackets. A low-profile Standard 3.5 mm boil-and-bite lets you breathe and talk during play. See basketball mouthguards and handball mouthguards, or all sports on our by sport page.
Children and teenagers with braces
Most orthodontic braces are fitted between the ages of 10 and 16, the age of back-to-back training sessions. In children, two movements add up: growth and treatment. Show the mouthguard to the orthodontist at an appointment, re-mould it more often, and check from time to time that it isn't chewed up. A child who complains of pain under the mouthguard should stop wearing it until the orthodontist has given advice.
Care with braces
- Brush your teeth before putting it in when possible, or at the very least rinse your mouth.
- Rinse the mouthguard in cold water after every session. Never use hot water except for moulding: it would warp.
- Clean it regularly, for example with cleaning tablets, and store it dry in a ventilated case.
Our advice in brief
During treatment: a boil-and-bite mouthguard, moulded without biting hard and re-moulded when your teeth move, with your orthodontist's agreement. After treatment: a custom-fit mouthguard, made from the impression of your settled teeth. In both cases, if in doubt, in pain or after a knock, the orthodontist has the final say.
Frequently Asked Questions
Can you wear a mouthguard with braces?
Yes, and it is even recommended for contact sports. The mouthguard stops the braces cutting your lips and cheeks in an impact, and limits the risk of dislodging a bracket or bending the wire. Ask your orthodontist for advice, especially for a child.
Which mouthguard should you choose with braces?
In practice, a boil-and-bite is generally a good fit: it moulds gently around the braces and can be re-moulded when the teeth move. Our Classic boil-and-bite is €29.90. The custom-fit is better planned for after the treatment.
How do you mould a boil-and-bite mouthguard with braces?
30 seconds in hot (not boiling) water, 30 seconds in your mouth without biting hard, pressing with your tongue and fingers, then 30 seconds in cold water. Remove it gently if it catches. Some orthodontists advise covering the braces with wax first: follow their instructions.
Is a custom-fit mouthguard possible during orthodontic treatment?
It is not recommended during active treatment: the custom-fit mouthguard is made from a fixed impression, whereas the teeth are moving. It can quickly become too tight or too loose. Have it made after the treatment, or with your orthodontist’s approval if they think the teeth will not move much more.
Do you need to re-mould the mouthguard after an orthodontist appointment?
Yes, as soon as you feel it fits less well, presses on a tooth or slips down when you talk. This is common after a wire change or an adjustment. The boil-and-bite can be re-moulded in 90 seconds, like the first moulding.
Can you do boxing with braces?
Many boxers train with braces, provided they wear a mouthguard and have their orthodontist’s approval. Side blows push the cheeks against the braces: a well-moulded boil-and-bite limits cuts. See our boxing mouthguard page.
Do you keep your aligners in under the mouthguard?
Generally not: in contact sport, you take the aligners out for the session, wear the mouthguard, then put the aligners back in straight afterwards. Your orthodontist may give you different instructions, notably on daily wearing time: follow their advice.
Mouthguard on the top or the bottom when you have braces on both arches?
In the vast majority of cases, on the upper teeth. It is the upper teeth that take most of the impact. Mould it without biting hard to leave room for the braces on the lower teeth. For a specific case, the orthodontist may advise something else.
Can you find an orthodontic mouthguard at the chemist's?
Some pharmacies offer silicone models described as “special for braces”, or standard boil-and-bite mouthguards. They are a stopgap, but the fit is often poorer. We detail the differences in our pharmacy mouthguard guide.
Which mouthguard should you wear after treatment, with a retainer?
Once the teeth have settled, the custom-fit becomes the best choice again: it is made from your impression and moulds around a bonded retainer wire. A removable retainer is taken out for sport, unless the orthodontist says otherwise.
Choose my mouthguard
You may also like
Guides by sport