A Mouthguard That Won't Stay In: Causes and Solutions
Is your mouthguard not staying in, dropping when you talk or making you feel sick? Here is the cause of each problem and what you can do, from re-moulding to custom-fit.
Contents
- The summary in one table
- Why a mouthguard won't stay in place
- It falls out as soon as you open your mouth
- It drops when you talk
- It makes you feel sick
- You can't breathe well with it
- Talking, drinking and eating with a mouthguard
- Wearing your mouthguard properly
- Re-moulding a boil-and-bite in 90 seconds
- When to switch to custom-fit
You open your mouth to talk and your mouthguard drops. You clench your jaw to keep it in, you breathe badly, and after three rounds it ends up in your glove. A mouthguard that won't stay in place isn't inevitable: there is almost always a specific cause. Here is how to find it and fix it, through the eyes of a dental laboratory.
The summary in one table
| Problem | Likely cause | What to do |
|---|---|---|
| It falls out when you open your mouth | Moulding not deep enough | Re-mould, pressing harder |
| It drops when you talk | Too big or badly moulded | Re-mould, otherwise custom-fit |
| Feeling sick | Too long towards the back | Check the instructions, otherwise custom-fit |
| You breathe badly | Too thick or you're clenching | Suitable thickness, better retention |
| It hurts the gum | Edge badly positioned or damaged | Stop, re-mould or replace |
Why a mouthguard won't stay in place
A mouthguard stays in by contact: it has to follow every tooth so it “grips” without you having to clench. Four causes come up again and again:
- It is too big: a model designed for a large mouth floats in a smaller one.
- It is badly moulded: water not hot enough, time too short, jaw clenched too hard so it crushes the material, or not enough pressure on the sides.
- It is too thick for your use: more material means more bulk in the mouth.
- Your teeth have changed: dental work, braces, a damaged tooth. Yesterday's impression no longer matches.
It falls out as soon as you open your mouth
This is the sign of moulding that is too shallow: the material hasn't gone far enough around the teeth. Good news, a boil-and-bite can be re-moulded. During the 30 seconds in the mouth, press the material against your teeth and gums with your fingers, on the cheek side, then suck hard to push out the air. Bite gently, without crushing. The test: with your mouth open, it should stay in place on its own.
It drops when you talk
When you talk, your tongue and lips move. A mouthguard held in only by biting comes loose straight away. If a careful re-moulding isn't enough, it's often because the model is too big for your mouth. This is where a mouthguard made from your impression makes the difference: it stays in by its shape, not by your jaw. You speak clearly, without catching it every sentence.
It makes you feel sick
The gag reflex is triggered when the mouthguard touches the back of the palate or the tongue too far back. The cause: a model too long for your mouth. Some manufacturers allow you to shorten the back; only do so if the instructions allow it, very slightly, and never with a heated tool. A badly trimmed edge becomes sharp and irritates the mouth. If in doubt, leave it alone. A custom-fit is cut in the laboratory to the right length for your mouth.
You can't breathe well with it
Two possible reasons. Either it is too thick at the front for your use. Or, more often, it doesn't stay in properly and you clench your teeth to keep it: the mouth closes and less air gets through. A mouthguard that stays in on its own lets you part your lips to breathe. For thickness, our models come in Standard 3.5 mm and Reinforced 5 mm: choose according to the intensity of impacts in your sport, not “the thickest to be safe”.
Talking, drinking and eating with a mouthguard
Talking: with a well-fitted model, yes. For the first few sessions, your voice changes a little; after a few training sessions, your tongue gets used to it. Talk slowly and articulate at first.
Drinking: a mouthguard that stays in lets you drink from a bottle without taking it out. If you have to remove it at every break, it's a sign it doesn't hold well enough.
Eating: no. Take it out to eat, rinse it and put it away in its case. A mouthguard isn't made for chewing, and food gets lodged in it.
Wearing your mouthguard properly
- Place it on your upper teeth, then press with your thumbs to seat it.
- Don't chew on it between exchanges: you deform the material and it will hold less and less.
- Rinse it in cold water after every session and let it dry in a ventilated case, away from heat.
- Replace it if it is cracked, holed or has a sharp edge.
Re-moulding a boil-and-bite in 90 seconds
- 30 seconds in hot water, not boiling, to soften the material.
- 30 seconds in the mouth: place it on your upper teeth, press with your fingers, suck, bite gently.
- 30 seconds in cold water to set the shape.
All the steps, in pictures, are in our instructions.
When to switch to custom-fit
If after two careful re-mouldings your mouthguard still won't stay in, if the nausea persists or if you wear braces, the boil-and-bite has reached its limits. Our custom-fit mouthguard is made in the laboratory from the impression of your teeth. Its inner layer follows every tooth, its outer EVA layer cushions. It stays in by itself, without clenching: you breathe, you talk, you drink without taking it out, and you end up no longer noticing it. It holds. You forget the rest.
Allow €79.90 for the Classic. We send you the impression kit, we check the impression before manufacture, and you receive it 5 to 10 days after approval. To compare the two options, read custom-fit or boil-and-bite. In case of pain, injury or orthodontic braces, ask your dentist for advice first.
Frequently Asked Questions
Why won't my mouthguard stay in place?
How do you get a mouthguard that keeps falling out to stay in?
Why does my mouthguard make me feel sick?
Can you drink with a mouthguard in?
How do you talk with a mouthguard?
Can you re-mould a boil-and-bite mouthguard that went wrong?
Choose my mouthguard
You may also like
Guides by sport